TSB 04 27 94 (4120): Special Tools - E36 Compact

Affected years: May 1995

Details

Group 04 Tools and Equipment Bulletin Number 04 27 94 (4120) Woodcliff Lake, NJ May 1995 Product Engineering SUBJECT: New Special Tools MODELS: E36 Compact Situation: The following special tools have been developed for the E36 Compact. These tools will be distributed through the Automatic Tool Shipment Program. Additional tools may be purchased through your PDC. Note : All prices in this bulletin are introductory prices and are subject to change. Mandrel P/N 90 88 6 331 312 Price = $4.80 Used in conjunction with 88 88 6 007 500 to remove the inner ring from the output flange. Spindle P/N 90 88 6 332 121 Price = $6.02 Used in conjunction with 88 88 6 332 120 to R&R the final drive bushings. Input Seal Driver P/N 90 88 6 333 430 Price = $12.37 Output Seal Driver P/N 90 88 6 333 460 Price = $8.86 Used in conjunction with P/N 88 88 6 005 500 to install the input and output shaft seals on the final drive "15" (side cover 4 bolts). Input Seal Driver P/N 90 88 6 333 480 Price = $7.67 Used in conjunction with P/N 88 88 6 005 500 to install the input shaft securing plate on the final drives K (side cover 4 bolts and M side cover 6 bolts). Alignment Gauge P/N 90 88 6 416 200 Price = $4.30 Used to align the rear hatch with the body and the rear windshield when replaced. The tool is optional. It may be purchased through your PDC. Subframe Support P/N 90 88 6 333 270 Price = $301.46 Used to support the rear axle subframe during R&R.